Advertising Disclosure

Best hard hats - Holiday Sale 2025

Last Updated - December 14, 2025

1
Best Choice

✖
Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

LIFT

DAX Carbon Fiber Full Brim (Black Camo)

LIFT

$180.00

$194.89
(7% Off)

More Details
Main highlights
- Lift
$180.00
$194.89 (7% Off)
2
Best Value
11% Off

✖
Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

MSA
11% Off

MSA 475407 Skullgard Full-Brim Hard Hat with Fas-Trac III Ratchet Suspension | Non-slotted Hat, Made of Phenolic Resin, Radiant Heat Loads up to 350F - Standard Size in Natural Tan

MSA

$134.99

$152.81
(11% Off)

More Details
Main highlights
- VARIETY OF SIZES & COLORS: Comes available in a large variety of colors and sizes with custom imprinting and striping options. With custom logo options and any of 27+ different reflective and retro-reflective stripes, MSA gives the ultimate experience in hardhat customization.
- MULTI-PURPOSE CAP STRENGTH: Crafted with a phenolic shell and handmade for durability, toughness and quality, this helmet is usable in a variety of industries. Use Skullgard helmets in steel mills, welding, construction, open-pit mining, oil/gas/petrochemical refineries, rubber manufacturing, and steam tunnels.
- MEETS PROFESSIONAL STANDARDS: Skullgard Caps meet all applicable requirements for a Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2014 (Class G). These caps have been fully third-party tested and certified by SEI. Date codes are molded into the underside of the shell’s brim with the year and month in which that specific shell was manufactured. **This date does not indicate a helmet’s service life; the service life begins when it is placed into service.** – See attached FAQ sheet
- HIGH QUALITY PROTECTION: Intended for general purpose use or in places elevated temperatures. These Skullgard helmets have been tested to radiant heat loads producing temperatures up to, but not exceeding 350°F. A smooth crown allows for the easiest use of all MSA welding equipment. Meet the voluntary standard for reverse donning, low temperature [LT], higher temperature [HT[, and Hi-Viz [HV].
- FAS-TRAC III SUSPENSION: Designed based on opinions and input from hundreds of customers, our top-end Fas-Trac III suspension functions as an improved ratchet suspension. Flush rear lug attachments eliminate pressure points and three levels of nape strap adjustment give for a fully customized fit. Ratchet comfort pad is contoured to the back of the head, improving airflow and preventing hair-pulling. Ensure continued wear with drastically improved comfort and a graspable ratchet.
$134.99
$152.81 (11% Off)
3

✖
Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

KLEIN TOOLS

Hard Hat, Vented Full Brim, Class C, Premium KARBN Pattern, Rechargeable Lamp, Padded Sweat-Wicking Sweatband, Top Pad

KLEIN TOOLS

$99.98

$109.98
(9% Off)

More Details
Main highlights
- VERSATILE ACCESSORY SLOTS: Universal slots on both sides allow for attachment of hearing protection, face shields, and other accessories
- RECHARGEABLE HEADLAMP INCLUDED: This model includes a Klein Rechargeable Headlamp (Cat. No. 56048) with a charging cable for convenient lighting on the job
- PREMIUM KARBN DESIGN: Stylish, durable hydro-dipped polymer film KARBN pattern on rugged PC/ABS composite for a modern and rugged appearance
- PATENTED ACCESSORY MOUNTS: Front and back mounts securely attach optional Klein headlamps without the need for straps or zip ties
- ENHANCED SAFETY STANDARDS: Class C, Type 1 hard hat with large adjustable vents meets ANSI Z89.1-2014, CSA Z94.1-15; EN397:2012+A1:2012-5.2.4 (Lateral Deformation-LD); EN12492:2012-4.2.1.2, 4.2.1.3, 4.2.1.4 (Front/Back/Side impact)
- ADVANCED COMFORT FEATURES: Machine washable sweat-wicking sweatband and top pad with evaporative technology provide all-day cooling and comfort
- ADJUSTABLE VENTS: Vents can be opened or closed for customized air circulation while maintaining safety compliance
$99.98
$109.98 (9% Off)
4

✖
Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

LIFT

Lift Safety DAX FIFTY/50 Desert CAMO Full Brim Hard HAT

LIFT

$112.50

$121.80
(7% Off)

More Details
Main highlights
- Triple reinforced crown for superior impact protection
- Our helmet line with race inspired designs offer a 6 point suspension system for superior comfort and impact protection. It features an innovative synthetic leather comfort dome and an over-sized ratcheting fitment dial that makes adjustment easy, even while wearing gloves.
- LIFT SAFETY - INDUSTRIAL SAFETY SUPPLIES PROTECTING TODAY, BUILDING FOR TOMORROW
- Designed to offer outstanding protection in hot and dangerous industries, the DAX Hard hat shell has been tested to radiant heat loads producing temperatures up to, but not exceeding, 350˚ F (177˚ C).
$112.50
$121.80 (7% Off)
5

✖
Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Aolamegs

Aolamegs White Type 2 OSHA Approved Hard Hats with Visor - Type II Construction Hard Hat with Chin Strap,Vented Hard Hats Work for Men,Safety Construction Helmet with 6 Point Suspension & Foam Liner

Aolamegs

$69.99

More Details
Main highlights
- Tough Enough for Extreme Conditions:Lightweight yet durable, this vented hard hat uses a ABS shell. Handles high/low temps (HT/LT rated) and stands up to daily abuse on job sites. It’s a tradesman favorite—built to last as a construction or industrial safety helmet
- Integrated Eye Protection System：This dedicated safety visor seamlessly integrates with your helmet, offering reliable eye protection. The sliding half-face shield effortlessly lifts or lowers, providing immediate wrap-around coverage against impacts, debris, and dust. Crafted from scratch-resistant PC material and certified to ANSI Z87.1 standards, it ensures durable performance
- All-Round Protection for Any Job:This ANSI Z89.1 Type 2 Class C safety helmet (also a tough hard hat and construction helmet) delivers 360° impact protection—top, front, sides, rear. Certified OSHA compliant, it shields users in construction, industrial work, heights, confined spaces, and emergency response. The EPS liner and 6-point chinstrap (standard on our hard hats with chin straps) lock the helmet in place, cutting slip/fall risks—ideal as a safety helmet too
- All-Day Enhanced Comfort:Engineered for maximum breathability during extended wear, this helmet features a advanced triple-ventilation system. With strategically placed, fixed vents on both sides and the rear, it creates a consistent, passive airflow that actively channels heat away from the head. The package includes a reflective sticker for easy application, adding an essential layer of safety during dark or nighttime operations
- ANSI Type II Certified Full Protection & Secure Fit:This Type 2 Hard Hat meets ANSI Z89.1 Type II standards for top and side impact resistance, featuring a shock-absorbing EPS foam liner and a secure 6-point suspension system with an adjustable chin strap. The hard hat with chin strap ensures the helmet stays in place during high-movement tasks, while the glove-friendly ratchet system delivers a custom, secure fit for 53–63cm head sizes—ideal for construction, rescue, and high-risk environments.
$69.99

Best hard hats - Holiday Sale 2025

DAX Carbon Fiber Full Brim (Black Camo)

MSA 475407 Skullgard Full-Brim Hard Hat with Fas-Trac III Ratchet Suspension | Non-slotted Hat, Made of Phenolic Resin, Radiant Heat Loads up to 350F - Standard Size in Natural Tan

Hard Hat, Vented Full Brim, Class C, Premium KARBN Pattern, Rechargeable Lamp, Padded Sweat-Wicking Sweatband, Top Pad

Lift Safety DAX FIFTY/50 Desert CAMO Full Brim Hard HAT

Aolamegs White Type 2 OSHA Approved Hard Hats with Visor - Type II Construction Hard Hat with Chin Strap,Vented Hard Hats Work for Men,Safety Construction Helmet with 6 Point Suspension & Foam Liner

You may also like...

Pyramex HP24110 Full Brim Hard Hat 4-Point Ratchet Suspension, White (12-Pack)

Klein Tools 60407RL Hard Hat, Rechargeable Headlamp, Vented, Full Brim Style, Padded Self-Wicking Odor-Resistant Sweatband, White

AFP Fiber Full Brim Hard Hat | 6 Point Ratchet Suspension | OSHA & ANSI Rated | Hard Hats for Men | Premium Construction Helmets for Safety

MSA 475395 Skullgard Cap Style Safety Hard Hat with Fas-Trac III Ratchet Suspension | Non-slotted Cap, Made of Phenolic Resin, Radiant Heat Loads up to 350F - Standard Size in Natural Tan

Leumoi 10 Pcs Suspension Hard Hat, Construction Hard Hat for Safety, Ratchet Cap Style with Self Adjusting Crown Straps for Man Woman (White)

Pyramex Ridgeline Full Brim Hard Hat 4 Point Ratchet Vented Matte Black Graphite Pattern

Pyramex Safety Products HP14110 Sl Series 4 Pt. Ratchet Suspension Hard Hat, White

Pyramex Safety SL Series Full Brim Hard Hat, 4-Point Ratchet Suspension, White, Medium

Pyramex Ridgeline Full Brim Hard Hat 4 Point Ratchet Matte Black Graphite Pattern

SecureFit Hard Hat SecureFit H-701SFV-UV, White, Vented Cap Style Safety Helmet with Uvicator Sensor, 4-Point Pressure Diffusion Ratchet Suspension, ANSI Z87.1, Medium

Sign up and get exclusive special deals